MSA is used when an understanding of measurement system variability is required. MSA studies will decompose measurement system variability into equipment, operator and part variation. It is often mandated by aerospace and other engineering primary manufacturers as a specific requirement on their suppliers to give them confidence in the measurements that are being taken and reported by the supplier.

This 5 day AS9145 Practitioner course will provide all delegates with an in-depth understanding at practitioner level of the AS9145 standard. It will provide all delegates with an in-depth understanding of the advantages and expected benefits of using the APQP and PPAP processes from planning, product design and development through to process design, validation and on-going production.

APQP is module one of the Core Tools Certification Training programme. This module can be completed as a standalone course or as part of the full Core Tools Certification Training.

The joint publication is the collaboration between AIAG/VDA, OEMs and Tier 1 suppliers. The text has been completely rewritten and the FMEA method has been revised in a few key areas.

The Core Tools Certification Training (APQP, FMEA, SPC, MSA and PPAP) is a 5 day course covering all the core tools using a "learn by doing" teaching approach. After short teach points delegates practice the use of the tools using case studies and delegate exercises. Delegates passing the application exam at the end of the course receive certification from SMMT, the IATF approved oversight office in the UK.

Failure Modes and Effects Analysis, (FMEA), is an analytical method to ensure potential problems have been considered, assessed for risk and actioned as part of both product and process design. It provides a record of an organisations collective knowledge about products and processes. It is widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.

The IATF 16949 Internal Auditor Training is a participative course is made up of a number of modules supported by group exercises and open discussion.

This participative course is made up of a number of modules supported by group exercises and open discussion. Delegates are evaluated through a proctored knowledge and application exam at the end of the course. The practical emphasis of this course and high tutor to delegate contact provides a unique opportunity for a substantial degree of individual guidance and training.

Measurement System Analysis, (MSA), is a method for gaining an understanding of the variation present in measuring systems. It is now widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation, when a high level of confidence is required for the measurement of product characteristics.

Consistently IATF highlights Problem Solving as the most common nonconformity. There are plenty of steps your organisation can take to enhance its problem-solving capabilities and in an IATF 16949-compliant manner.

Statistical Process Control, (SPC), is a method for gaining an understanding of the types of variation within a process and hence guide actions to either control or reduce this variation. It is used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.

This training provides you with the basics for performing process audits according to VDA 6.3.

This training provides you with the basics for performing process audits according to VDA 6.3, considering the process-oriented approach and customer-specific requirements for comprehensive application in the automotive industry.

APQP is module one of the Core Tools Certification Training programme. This module can be completed as a standalone course or as part of the full Core Tools Certification Training.

The joint publication is the collaboration between AIAG/VDA, OEMs and Tier 1 suppliers. The text has been completely rewritten and the FMEA method has been revised in a few key areas.

MSA is used when an understanding of measurement system variability is required. MSA studies will decompose measurement system variability into equipment, operator and part variation. It is often mandated by aerospace and other engineering primary manufacturers as a specific requirement on their suppliers to give them confidence in the measurements that are being taken and reported by the supplier.

This 5 day AS9145 Practitioner course will provide all delegates with an in-depth understanding at practitioner level of the AS9145 standard. It will provide all delegates with an in-depth understanding of the advantages and expected benefits of using the APQP and PPAP processes from planning, product design and development through to process design, validation and on-going production.

The Core Tools Certification Training (APQP, FMEA, SPC, MSA and PPAP) is a 5 day course covering all the core tools using a "learn by doing" teaching approach. After short teach points delegates practice the use of the tools using case studies and delegate exercises. Delegates passing the application exam at the end of the course receive certification from SMMT, the IATF approved oversight office in the UK.

Failure Modes and Effects Analysis, (FMEA), is an analytical method to ensure potential problems have been considered, assessed for risk and actioned as part of both product and process design. It provides a record of an organisations collective knowledge about products and processes. It is widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.

The IATF 16949 Internal Auditor Training is a participative course is made up of a number of modules supported by group exercises and open discussion.